How to Sign Up for Reading Plus

Support | TEACHERS

Frequently Asked Questions

How practise I create a new instructor account?

At that place are several means to create a new educatee account manually. Directions for creating a educatee from both admin and instructor accounts are below. To enter a large number of students into Reading Plus at one time, view the section beneath titled "How practise I import students or staff?"

Ambassador- How to Create a Student, method i

1. Log in to your admin account
2. Click on the light-green "Students" tab at the top of the page
3. Click on the "Create" link at the bottom left of the page
4. Fill in the student'southward Offset Name, Last Name, Username, Password, and Class and any additional information
5. Click Save

The student can so be enrolled in their grade by the teacher or admin. See the section "How do I enroll/unenroll students in my classes?" below.

Administrator- How to Create a Student, method 2

1. Log in to your admin account
2. Click on the green Classes Tab
3. Click on the greenish gear next to the advisable form proper name
4. Cull Enroll/Unenroll Students from the menu on the left
5. Click the plus sign that says Enroll
6. You see a list of all students who already accept a Reading Plus account
   • Check that your student does non already have an account
7. Click the green Create New Pupil link
8. Enter the required fields and any additional information
9. Click Salve or Save & Create Another
10. Click the "Washed" push

*This method will enroll the student in their class without any extra steps.*

Instructor- How to Create a Student – Teacher Guide

1. Log in to your teacher account
2. Click "Settings" in the tiptop correct corner
3. Click on the course that yous want to enroll the student into
4. Click the "Enroll/Unenroll Students" link from the menu at the left
5. Click the "Enroll" button
6. Make sure that the student's proper name is not listed
7. Click "Create New Student"
8. Enter the required fields and whatever additional information
9. Click Save or Relieve & Create Another
10. Click the "Done" push

*This method volition enroll the student in their class without any actress steps.*

Administrator-How do I create a new teacher account? Administrator Guide

To create a Reading Plus teacher account manually, follow the steps below:

1. Log in to your admin account.
2. Click the dark-green "Staff" tab.
3. Click "Add together Staff."
4. Enter the first and terminal name of the teacher.
5. Enter the teacher's email accost.
6. Enter their username (email accost recommended).
7. If yous are creating an ambassador account, check the box that says "Administrator rights when checked."
8. Click Relieve or Save & Create Another.

The teacher will receive an email with a link to set their password. They will so be able to log in to their Reading Plus account with their new credentials.

To enter a large number of teachers into Reading Plus at one time, click on the "How exercise I import students and staff?" department beneath.

How do I import students and staff?

The Importer is a tool that allows Reading Plus administrators to create a large number of student or staff accounts at one time. Please visit our imports folio and follow the steps provided to fix your import file. Make sure the file is named "teachers" or "students" and saved in a CSV format; otherwise you will not be able to import the file. Once you lot have created the import file, follow the steps beneath to import the students or staff into Reading Plus.

1. Log in to your admin account
2. Click the green "Site" tab
3. Click "Imports" at the lesser of the box on the left
4. Click on the green push for either "Upload Teachers" or "Upload Students"
5. Select the advisable file from your estimator
6. If the box is in red, review any changes that may need to be made to the file
   • Make the necessary changes to your file
   • Click Reset Importer
   • Re-import your updated file
7. If the box is in dark-green, ensure that all the information is correct
8. Click the Import push to consummate your import

Your students or staff at present take Reading Plus accounts at your schoolhouse!

How do I create a class?

Below are steps on how to create a Class in Reading Plus from either a Instructor or an Administrator business relationship.

Teachers- How to Create a Form

1. Log in to your teacher account
2. Click "Settings" in the top right corner
3. Click "Create Form" at the bottom left of the page
4. Enter your desired title for the Class
5. Click Save
6. You lot will exist automatically assigned every bit a teacher of this class.
   • If you would like to add a co-teacher, click "Assign" at the bottom of the folio.
   • Click on the name of the co-instructor for the class
7. Click the Back button or go on your grade prepare-up by enrolling students.

Administrators- How to Create a Grade

1. Log in to your admin business relationship.
2. Click the "Classes" tab at the top of the folio.
3. Click "Create Grade" at the bottom left of the folio.
4. Enter your desired title for the Course.
5. Click Save.
6. Click "Assign" at the bottom of the page.
7. Click on the name of the teacher for the form, or click "Create New Instructor."
   When creating a new teacher:
   • Enter the get-go and last name of the teacher.
   • Enter the instructor's email address.
   • Enter their username (email address recommended).
   • Click Save or Salvage & Create Another.
   • The teacher will receive an electronic mail with a link to fix their password.
   • When yous have finished, click the Ten.
8. Click the Back button or continue your class set-up by enrolling students.

For information on enrolling students, click on the "How practice I enroll/unenroll students in my classes?" section beneath and brainstorm at Step four.

How do I enroll or unenroll students in my class?

Teachers or admins tin can enroll students with existing Reading Plus accounts into their classes. Alternatively, admins or teachers tin create new pupil accounts manually as function of the enrollment process. Below are directions on how to enroll a student into a form.

Teachers- How to Enroll Students

1. Log in to your teacher business relationship
2. Click "Settings" in the top correct corner
3. Click on the class that you want to enroll the educatee into
4. Click the "Enroll/Unenroll Students" link from the menu at the left
5. Click the "Enroll" button
6. Click on the student's proper noun from the list to enroll them in the class
7. If the educatee is not listed, click "Create New Student"
   • Enter the required fields and any additional information
   • Click Salvage or Save & Create Some other
8. Click the "Washed" button

Administrators- How to Enroll Students

1. Log in to your admin account
2. Click the "Classes" tab at the summit of the page
3. Click the gear symbol next to the name of the course you want to enroll the student into
4. Click the "Enroll/Unenroll Students" link from the menu at the left
5. Click the "Enroll" push
6. Click on the student's proper noun from the listing to enroll them in the class
7. If the student is non listed, click "Create New Pupil"
   • Enter the required fields and any additional information
   • Click Save or Save & Create Another
8. Click the "Washed" button

To unenroll a student, follow the appropriate steps 1-4 in a higher place. At this point, click the "Unenroll" link to the right of the pupil's name on the class roster. Unenrolling will remove the educatee from the class, but information technology volition non delete their business relationship.

What is the deviation between a Group and a Class? Why tin't I create student accounts in my grouping?

Groups in Reading Plus are a View-only collection of students. Groups are generally created for students' secondary classes, such as an after-school programme, a tutoring group, or a homeroom. Teachers of Groups are able to view students' progress inside the program, but they cannot make direction changes every bit they would for a Class.

Students must first be enrolled in a Form before they can be enrolled in a Grouping. To enroll a educatee in a Class, follow the directions in the section above. If you practise not have any Classes assigned to you, y'all tin inquire your Reading Plus ambassador to assign you to a class, or y'all can create a class from your teacher business relationship by following the directions above. Once the student is enrolled in a Class, you will be able to enroll them in your Group without an issue.

I forgot my instructor or administrator username or password. What can I practice?

The easiest way to retrieve your login credentials is to utilize our Password Reset Tool.

How to Reset Your Password:

1. Go to login.readingplus.co.u.k.
2. Click Educator Login
3. Click the Reset Countersign link below the login fields
4. Enter your email address and click Reset Password
5. You lot will receive an email, click the link to set your password
6. You volition see your username next to the text "Enter your new password for username:"
7. Enter a new password
8. Click the link to log in to your business relationship with your credentials

If y'all do not know if you have a Reading Plus account, contact your school's Reading Plus ambassador. If y'all know you have an account but y'all exercise not receive an email, contact Reading Plus Customer Service at support@readingplus.co.britain or 1-800-732-3758 selection 1.

What is a Schoolhouse Twelvemonth Reset, and why do I have to do information technology?

Resetting your Reading Plus rosters is an important first stride to become fix for the new school year. A reset of your rosters triggers five important functions:

• unenrolls all students from their current classes
• remove all classes and groups
• assigns InSight Benchmark 1 to all students
• clears Actions/Messages/Suspensions
• increases the grade level of students past one course

How do I assign the InSight assessment?

Below are instructions for assigning InSight at the site, class, and individual student level. Just a reminder that Benchmarks 2 and iii are the assessments that demonstrate student progress throughout the Reading Plus implementation. Typically Benchmark 2 is used at a midterm betoken, and Criterion three is assigned at the end of the term to run into the progress and gains of the students.

Benchmark ane is the Initial Assessment which students take at the beginning of Reading Plus implementation. Benchmark 1 should but be assigned ONCE, and it is typically automatically assigned at the commencement of the school year.

Please Annotation: If Benchmark ane is assigned to a pupil a 2nd time in the aforementioned term, information technology will reset a student's progress and remove their initial Benchmark i score.

One time InSight is assigned, students will be prompted to begin the InSight cess the next time they log in to their Reading Plus accounts.

Administrator- How to Assign Benchmark 2 & 3 to an Entire School

1. Log into your Ambassador Account
2. Click on the green "Site" tab
3. Select "InSight Settings" from the menu on the left
4. Check the box side by side to "Assign InSight Cess"
5. Bank check the box next to Assign mid-term assessment (Benchmark 2) or Assign finish-of-term cess (Benchmark three)

Administrator- How to Assign InSight At The Class Level

1. Log in to your Reading Plus account
2. Click the "Classes" tab
3. Click on the gear symbol adjacent to the appropriate class name
4. Click the "InSight Settings" link from the menu at the left
5. Click the box to "Assign InSight Assessment"
6. Check the box side by side to Assign mid-term cess (Benchmark 2) or Assign end-of-term assessment (Benchmark 3)
7. Click "Save"

Teacher- How to Assign InSight At The Class Level – Teacher Guide

1. Log in to your Reading Plus business relationship
2. Click the "Settings" link in the top right corner of your Teacher Dashboard
3. Click on the appropriate class
4. Click the "InSight Settings" link from the bill of fare at the left
5. Click the box to "Assign InSight Assessment"
6. Click to "Flag all students to have the InSight Cess"
7. Check the box adjacent to Assign mid-term assessment (Criterion 2) or Assign terminate-of-term assessment (Criterion 3)
8. Click "Relieve"

Administrator- How to Assign InSight At The Pupil Level

1. Log in to your Reading Plus admin account
2. Click the Students tab at the top right of the dashboard
3. Click on the appropriate educatee proper name
4. Cull "InSight Settings" from the menu at the left
5. Click the checkbox side by side to "Flag Educatee to take the InSight cess" and choose the assessment you lot wish to assign
6. Click Save

Teacher- How to Assign InSight At The Pupil Level

1. Log in to your Reading Plus teacher account
2. Click on the "Assignments" widget in the heart of the screen
3. Choose the advisable class from the dropdown menu on the top left of the screen
4. Click the appropriate student proper noun
5. Click the green Settings tab on the left
6. Choose "InSight Settings" from the menu at the left
7. Click the checkbox next to "Flag Educatee to take the InSight cess" and choose the cess you wish to assign
8. Click Save

My pupil is "On Concur" in the SeeReader reading program. How tin I release the hold and so the student can continue with lessons?

Students are put "On Hold" in SeeReader due to low or inconsistent comprehension in SeeReader. This is a nifty opportunity to check in with your student about their SeeReader progress. It'southward also a good time to remind students to use their ReReads every lesson and discuss other comprehension strategies that tin improve their score. Instructions on how to release the hold are below.

How To Release a Hold  (Current Direction System)

1. Log in to your teacher business relationship, or log in to your admin account and click "Teacher View" at the top of the page
2. Select the advisable class from the dropdown carte in the height left corner
3. Click on the the Actions Panel
4. Whatever students On Hold will accept a reddish triangle
5. Click on the specific educatee's name
6. Read the analysis of the student's hold and review the educatee's recent SeeReader data
7. To release the hold, send the student a bulletin by clicking the "Send Bulletin and Clear Action" button.
8. Once you accept sent the student a message, they will exist able to continue working in SeeReader.

How To Release a Hold  (Try Beta Management System)

1. Log in to your instructor account, or log in to your admin account and click "Endeavour Beta" at the top right of the page
2. Click on Classes and select the appropriate class name
3. Click on the the Alerts Panel
4. The number of Holds will be displayed in the corresponding Grade
5. Click on the Holds Icon
6. Read the analysis of the student's hold and review the educatee'southward recent SeeReader data (View Student Overview)
7. To release the hold, transport the student a bulletin by clicking the "Transport Message and Release Hold" button.
8. One time you lot have sent the educatee a message, they will be able to keep working in SeeReader.

Please note that the student volition even so see a message on their Pupil Dashboard that they are On Concur until they complete a SeeReader lesson.

How do I view or print pupil usernames and passwords?

All teachers accept access to their students' usernames and passwords. To find that data, follow the steps below.

1. Log in to your teacher business relationship.
2. Click on Reports.
3. On the right hand side of the page, cull the appropriate grade from the first drop-down menu.
4. From the 2d drib-down menu, select Student Usernames and Passwords.

This will pull up a report with all the students' usernames and passwords. If yous would similar to print this study, click Print on the bottom correct corner of the page.

Student Consignment boxes are non showing up on their dashboard. What can I do?

There are a few reasons why a pupil's assignment boxes may not actualization on their dashboard.

one. The student completed the InSight assessment in the current week.

Students are not held accountable for completing weekly Instructional Assignments until the Monday following the completion of InSight. This means that whatsoever students who completed InSight this week will non see checkboxes until next week.

ii. A class calendar has non been ready properly.

If the grade calendar is non set properly, then the program will not recognize that the students are existence assigned lessons. For case, if the calendar is nevertheless set with the previous yr'southward dates, then students volition not receive assignments since the end date has passed. Please ensure that the class calendar has been set for the electric current class's instructional menses. Instructions for doing then are beneath.

Ambassador- How to Prepare a Class Calendar

1. Sign in as an administrator
2. Get to the "Classes" tab
3. Click on the gear next to the appropriate class proper noun
4. Click "Class Calendar"
5. Set the start and end dates for the class.

Teacher- How to Set a Form Calendar

1. Sign in every bit a teacher
2. Get to your "Settings" in the summit right hand corner
3. Click on the appropriate grade proper name
4. Click "Class Calendar"
5. Set the start and terminate dates for the class.

3. The Class Weekly Assignments have not been set.

To verify that the Grade Weekly Assignments have been set for the class, follow the steps below.

Teacher- Verify or Change Class Assignment Settings

To verify assignments for a whole class:

1. Click "Settings" in the elevation right hand corner of your screen
2. Click on the appropriate class name
3. Select "Class Program Settings"
4. Verify that the assignments are set for the class. Customize the settings to match your desired weekly pedagogy.

To verify or change assignments for an private student:

1. Select the advisable class from the top left corner
2. Click the Assignments Console
3. Click on the name of the pupil you'd like to change
4. Click on the "Settings" tab at the left
5. Select the "Instructional Assignments" link at the left
6. Verify that the assignments are set up for the student. Customize the settings to match your desired weekly instruction.

Administrator- Verify or Change Grade Assignment Settings

1. Click the "Classes" tab.
2. Click on the gear next to the appropriate class name
3. Select "Class Program Settings"
4. Verify that the assignments are set up for the class. Customize the settings to match your desired weekly instruction.

How can I modify my pupil'due south G-Charge per unit, Reading (SeeReader) level, or Vocabulary (ReadAround) level?

We recommend post-obit the logic of the program whenever possible and not making transmission changes to a student'southward plan settings. However, if you wish to make changes to a student'due south program settings, follow the directions below.

Teacher- How to Change Student Program Settings

1. Log in to your teacher account
2. Select the appropriate grade from the summit left corner
3. Click the Assignments Panel
4. Click on the proper name of the student you want to change
5. Click the "Settings" tab on the left
6. Click "Program Settings" from the menu on the left
7. Make any appropriate adjustments to SeeReader level, ReadAround level, or K-Rate
8. Click "Relieve"

Ambassador- How to Change Student Program Settings

1. Log in to your admin account
2. Click the "Students" tab at the elevation correct of the page
3. Click on the name of the student y'all want to change
4. Click "Program Settings" from the menu on the left
5. Make any appropriate adjustments to SeeReader level, ReadAround level, or G-Rate
6. Click "Salve"

jacksongoved1943.blogspot.com

Source: https://www.readingplus.co.uk/customer-support/teachers/

Share this post